Owning a car is not only to ensure that the tank is full, the windshield wiper fluid in the car and the tire pressure is not lower than the number indicated in the instructions. Everyone who owns a car should know how to change a tire, oil change and should know how to divide the battery in their car in the garage, while on the road. Jump start a car is not as easy as it seems and there are a handful of steps that must be followed forStarting to be completed successfully and safely.
The first step to jump start a car is parked the car on the bridge close to the vehicle stalled. Usually placed on the cars jumper only five meters or so against the car stalled when the doors today. Just make sure the two cars that do not affect in any way. Be sure to clean the jumper cables and you never let them dangle in the engine room where they can get caught on your belt or the fan. Once the jumper cableswere prepared for the project to ensure that the ignition is switched off in two cars and the parking brake on each car. Make sure you car is in park or neutral. Turn all the lights and radio, but focus on the dangers of the side of a road.
Jump Starter
Now you can begin the process of jumping. Place a jumper cable to the positive terminal of the positive battery installed on the vehicle. Then connect the other end of positive cable to the positive terminal of the batteryCar Jumper. Connect the negative end of the cable to the negative terminal of vehicle battery jumper. Connect the other end of negative cable to a metal surface on the car engine stalled. In this case the vehicle is now founded on.
Before performing the early departure, a final check to ensure that the jumper cables securely mounted on the vehicle and not close to moving parts of the engine. Now you can leave your car and bridgein a few minutes of inactivity. Once the can is inactive for about five minutes you done now start the car stalled. Once the vehicle is started stalled, ensure that both vehicles to stay and leave for another five minutes or so to a minimum. If the vehicle does not start a stalled, not to keep trying. This can damage the starter motor of the vehicle stalled.
Once you are able to restart the stalled car, you can begin to disconnect the starter. Take in the reverse orderYou put it. In addition, you can not touch each other or something under the hood. To ensure that the vehicle stalled will not stop again, take control of a body shop for a full charge and fast again.
Steps to Jump Start a Car
No comments:
Post a Comment